Steps to Replace a Tag Heuer Watch Band

Tag Heuer is known worldwide for making superior quality oris watches

. Tag Heuer watches, which is produced since the 1860s, are popular, and many watches have both rubber and steel bracelets that can be used to create different looks. Changing the band on a Tag Heuer is not difficult, but it does require special tools.Step 1Place the watch face down on top of the soft cloth, which will prevent damage while working on the band.Step 2Locate the point where the band and replica Concord

case connect-this point is commonly known as the lug of the Panerai watches

. From the underside of the watch, locate the two small holes on either side of the bracelet in the lug. These allow access to the spring bars.Step 3Use the small forked end of the spring bar tool to push the small metal bar inside of the lug hole towards the watch bracelet. This will catch the bar and pull it out of the lug, allowing for a gentle pull to release the watch bracelet. Repeat this for both bracelet halves.Step 4Place the spring bars that remove from the old watch band, and place them in the replacement band. Place one half of the spring bar inside the lug, and then use the spring bar tool to push down the other half of the bar. While compressed, slide that half of the band into the lugs. Pull the band to check that it has properly seated in the replica Hermes

lug. Repeat for both sides of the band.?